Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Parts have arrived to start a complete rebuild of the flippers MEC's and wires !!
Just about to start and spotted this diode on the Eos switch !
Basically is it supposed to be there ? And if not why is it there ?
All diodes on all coils here's a better picif I am reading it right that's the switch which activate the upper coil ,but the gap is too small should be 1/8 " gap , just thinking could it be causing a fanton upper flip and that's why a diode was fitted . looks like I will have to unsolder the diodes to check if one has failed !