Bally Space Invaders - Anyone able to provide their Alltek dip switch settings?

[Trips]

Bally Space invaders Alltek dip switch settings help needed please.

Picked up a Space Invaders pinball over the weekend.
Manged to get a few games out of it.
Then nothing happens when selecting start button. Read a few things and managed to get some credits added by amending switches.

Understand my Alltek board (HS3 94V-0) has the ability to set free play.
Obtained the dip switch settings from cdn.shopify.com/s/files/1/0071/0810/0141/files/dip_ver8.pdf?132
Space Invaders 00011001

Whilst machine loads up, plays sounds on start, nothing happens upon pressing start button.

I have read and attempted numerous setting changes to no avail.
Switch 27 is off for disabling credit display feature as suggested.

Anyone have a space invaders with an alltek board? If so can you provide your switch settings please?

Here's mine.
Thanks
Dennis

 

[Trips]

Typical. Sussed it!
"Free Play Settings, (Bally Only).
To place any of the Bally games in free play
mode, just place the left most switch in the
on position".

So 00011001 became 10011001 and now works.