Right at last managed to set this up! I knew it had switch matrix problems and battery cpu leak! But F114 was blown I replaced that and +12v led is now lit but still no response from coin door switches? pin is stuck in factory setting restored screen and I can't press escape to clear that.
Now the cpu is booting but I have green stuff on all the legs below the battery area but plugs look good as do the pins.
Before I dig the box out will a Hurricane cpu board suit popeye?
Cheers guys
Ronnie
Now the cpu is booting but I have green stuff on all the legs below the battery area but plugs look good as do the pins.
Before I dig the box out will a Hurricane cpu board suit popeye?
Cheers guys
Ronnie