Sold B.O.P - The Machine - Bride of Pinbot

[Turbopuss]

Her ladyship has decreed that before I get a CFTBL or Willy Wonka ( got kids ! ) my Bride of many years has to go.
This one came from Tattyadams ( hi Matt hope all is good ) about 8 years ago - it is the one on his youtube video.

Mods since I have owned is Cliffys on both ramps and the rather smart model Space Shuttle with the LEDs at the back. Superbands on the flippers which are strong.

She has a small amount of paint loss under the egg crate dropout thing, and there is wear ( paint loss ? ) around some of the decals - the picture will tell the story.

I think the Cab is in very reasonable shape with no fading on the sides or the head - there are some scratches and small touch ups. No lock bar holes and coin door is good.

Translite is very good. Glass is newish correct thickness and spec. Full original Manual with all the diagrams present.

BAD POINT - she plays lovely but in the past couple of months has occasionally reverted to Factory Settings when I switch off at the mains - never had leaking batteries - no sign of any board corrosion.

I have re-seated the ribbon cables and given the chips a push and then all is ok for a couple of days - but then it happens again - my tech knowledge stops at this point so I am not comfortable to tinker any further.

Located in Paignton, Devon and looking for £2.5k ish please. ( could possibly deliver Devon, Cornwall, Somerset as just got a Volvo XC90 last week - anybody know if a pin will fit ? )

 

[Mfresh]

Xc90 is a perfect pin moving device. Room for a sack barrow as well.

 

[Turbopuss]

Xc90 is a perfect pin moving device. Room for a sack barrow as well.

Thanks Paul...good to know.....so with a Sack Barrow as well it will leave no room for the dragon....useful

 

[Turbopuss]

Sold to a member on here subject to the usual.

Thanks for all interest.

Donation incoming