I have problem with ball trough mechanism from the begin when I have the machine.3-4 years and always was thinking that the problem is from the rollover switches because the were not original and the balls go trough little bit more hard.
But these days had a chance to have brand new and more soft Chery switches compared with these that were on the machine.
So I replaced all of them but the problem still stay the same-Not every game but form let's say 10 games at 2-3 the first ball stuck somehow before it go trough to be kick from the kicker.The claw move of course but the ball stuck somehow very close to the claw.So I must open the coindoor and to roll back all the balls and at this situation the machine just end the ball.
I was thinking that may be the claw have soften spring and it moves much faster and the first ball just cannot go trough.Put much hard spring but effect was minimal.All coils are original and working.No hacks on the mechanism,everything is like should be.
No I think that the level of the machine is not so right compared with my WMS machines.
What is the normal or optimal high at the back and front?
I think and my front legs are not right too.They are much tall than the back and don't have the yellow sticker inside them.I know all SEGA have this.
Are front and back legs must have same long when they are detached ,I mean only the metal parts without the leveler?
And of course could this be the reason if the angle is too big and this thing somehow force the ball to stuck.
I made these measurement and you can see the difference.
But these days had a chance to have brand new and more soft Chery switches compared with these that were on the machine.
So I replaced all of them but the problem still stay the same-Not every game but form let's say 10 games at 2-3 the first ball stuck somehow before it go trough to be kick from the kicker.The claw move of course but the ball stuck somehow very close to the claw.So I must open the coindoor and to roll back all the balls and at this situation the machine just end the ball.
I was thinking that may be the claw have soften spring and it moves much faster and the first ball just cannot go trough.Put much hard spring but effect was minimal.All coils are original and working.No hacks on the mechanism,everything is like should be.
No I think that the level of the machine is not so right compared with my WMS machines.
What is the normal or optimal high at the back and front?
I think and my front legs are not right too.They are much tall than the back and don't have the yellow sticker inside them.I know all SEGA have this.
Are front and back legs must have same long when they are detached ,I mean only the metal parts without the leveler?
And of course could this be the reason if the angle is too big and this thing somehow force the ball to stuck.
I made these measurement and you can see the difference.