What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Complete Another Addams Restoration

s000m said:
Royal mail are bloody useless... Still waiting on stuff.

As a result I focused my efforts on preparing the plastics.

Many thanks again @russdx1 for the err long term loan of your rivet press 😅 it's getting a lot of use at least!

P.s. I hate doing rivets


View attachment 183052

View attachment 183053

View attachment 183054

View attachment 183055

View attachment 183056

View attachment 183057

View attachment 183058

View attachment 183059

View attachment 183060

View attachment 183061

View attachment 183062

View attachment 183063

View attachment 183064

View attachment 183065

View attachment 183066

View attachment 183067

View attachment 183068

View attachment 183069
Click to expand...
Parcel man turned up with with nice new goodies then. Love new plastics.
Hope my parcel man turns up tomorrow, I’m tapping my fingers until he does.
 
Happypin said:
Parcel man turned up with with nice new goodies then. Love new plastics.
Hope my parcel man turns up tomorrow, I’m tapping my fingers until he does.
Click to expand...
Nah plastics I had for weeks.

I'm waiting on 4 parcels.

Ant sent the VUKs with DX on a 24 Xpress and they say Friday for delivery 😖

Royal mail have 2 of my parcels which are stuck in delivery depots. I called today as I paid customs on them last week and they said it's odd that there just stuck...

Another is on royal tracked 24 and 3 days on I'm still waiting. Bloody nightmare honestly.
 
All stuff finally arrived!

Dropped off all sorts to the powder coaters.

Will update shop logs accordingly.
 
Unfortunately it won’t take long before they are showing ball trails.
It’s just the joys of pinball ownership.
 
Back on Addams again.

BSD needs its Power Driver board repaired and awaiting shipment of comets.

VUK's now installed... again the bloody dimples don't line up to jack. I know people like CPR playfields but bloody hell :/

PXL_20221011_135630604.jpg


Will likely attempt migration of the harness tonight, wish me luck.
 
Switched the red targets, I hate soldering daisy chain targets, especially this many. Hopefully I did it all right 😖.

PXL_20221016_111142364.jpg

Switched out the white target

PXL_20221016_112718220.jpg

Finished up the switch harness.

It may not be zinc plated or powder coated but hey it's clean.

PXL_20221016_134846604.jpg

PXL_20221016_134850415.jpg

PXL_20221016_134854762.jpg

PXL_20221016_134857728.jpg

PXL_20221016_134900084.jpg

PXL_20221016_134910706.jpg

Next up I gotta do the pop bumpers, then it's onto the GI harness.
 
Ok pop bumpers wires done, had to finalize the tunnel, alignment was a nightmare. Dimples were again next to useless.

PXL_20221016_205807523.jpg

PXL_20221016_205126698.jpg


PXL_20221016_215327724.jpg

PXL_20221016_215343045.jpg

Now I just need to place and fit the GI.
Finish the pops and it's ready to go inside the cab.
 
Last edited:
Mind-boggling just to look at, can’t imagine how intricate and challenging it must be to take apart and re-assemble. Kudos good sir! Be glorious when you can finally kick-back, experience the fruits of your labours and play it.
 
Lroy said:
Mind-boggling just to look at, can’t imagine how intricate and challenging it must be to take apart and re-assemble. Kudos good sir! Be glorious when you can finally kick-back, experience the fruits of your labours and play it.
Click to expand...
Thx mate. Yeah it's coming a long now. Was a bit intimidating seeing a bare playfield and putting everything back together.

Tomorrow I give the playfield another go over before flipping it and installing the lane guides.
 
Ok so just gotta put on the hooks and backboard onto the playfield and it's ready to go in.

PXL_20221019_150656572.jpg

PXL_20221019_150659998.jpg
 
You must log in or register to reply here.
Back
Top Bottom