What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Advice with Stern board maintantice tips.

R

robertlucas1970

I'm going to take the I/O board out and replace some transistors as somebody has just cut the legs and soldered to the old legs.
Is there anything else I should change while the board is out ?
I have noticed C203 looks a bit swollen, so will do that as well.
If C203 is going bad should I just replace them all ?

Many Thanks
 
Back
Top Bottom