What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Adding an external sub to system 6

Mooseman

Site Supporter
10 Years
Joined
Feb 10, 2012
Messages
2,094
Location
Runcorn
I have a Gorgar dum dum dum dum
And a spare external sub from an old surround sound system.
I’ve read how people connect from the internal speaker to high level inputs on a sub but unfortunately my sub only has low level input or sometimes called line level inputs. Any one know how I can hook it up? Or should I just get a new speaker for the pinball cabinet?
 
I’ve seen something that may be similar on eBay for car systems. It was some small box of tricks that had about 10 wires that I wouldn’t have a clue where to connect?
Does that sound similar to what you have?
If you find it would be much appreciated
Cheers @M4carp
 
Hi Moose,
You need a line level converter. They vary in quality and price. Try and buy one with a turn on delay(this stops popping from the speaker input ) and adjustable line levels. Here’s a picture of one.
s-l300.jpg
Here’s a link to one we have used in the past that is average....


This one is a little better, but none of them are great as they no longer contain a ground loop isolation circuit, so you will pick up a bit of “noise”........


Hope that helps. Any more info just d.m. Me Moose.😎
EDIT: The connects2 ones like @M4carp has are good as well, we have used those many times......
 
Last edited:
Back
Top Bottom