A Frame Stands

[County1883]

Hi All

After some A Frame stands which will take the weigh of a pinball without the head etc. I am planning to work on the cabinet (fill, repaint etc.)

Would these do the job?

https://www.amazon.co.uk/gp/product...act_title_1?ie=UTF8&psc=1&smid=A3P5ROKL5A1OLE

 

[Mfresh]

Each one can take 125KG so if you use two to support the cab with no head (which should weigh less than 120KG) you should be fine weightwise. And they are plenty wide enough I would have thought.

 

[astyy]

^^^ agree with this, the cabinet doesn't weigh much alone once backbox and playfield are removed.

How about using a couple of workbenches instead? I have one similar to this and dead handy for working around the machine, drilling etc.
http://www.maplin.co.uk/p/multi-purpose-workbench-n07jf

 

[Paul]

I use one of these:

http://www.diy.com/departments/mac-...ck-grip-clamp-workbench-w550mm/1511731_BQ.prd

Best £45 I ever spent on a work surface!!

 

[Jsyjamie]

I use one of these:

http://www.diy.com/departments/mac-...ck-grip-clamp-workbench-w550mm/1511731_BQ.prd

Best £45 I ever spent on a work surface!!

This looks great! Will be popping up to B&Q tomorrow morning