looking good man - only bit of advice I would give is the lap should really of been on roofers battens to give an air gap behind it to stop condensation and rot, but hey ho I'm sure it will be fine!!
Cheers
kev
Yeah true!!! but then your membrane would of needed to be on the outside of the OSB which is a bit hard to do now!!!Should have clad the whole outside with osb board too.
I got a 7x7 tools shed a while ago for almost £300. Bet it doesn't last as long as this.
I thought it was taking on the shape of a timber storage container myself.what must your neighbours think?
so far it looks like something the police would put up as a temp structure to dig for bodies. watching with interest, keep it coming
Why not just level the concrete and save the hassle, then if needed pour a self levelling compound on top of the concrete to smooth it off depending on what's going on top...but old carpet on concrete will be fine for a pin shackYeah. Going to insulate the roof and walls.
Going to lay a little screed on the floor to level it. Inch of jablite and damp proof. Then two inches of concrete.
Going to do a fiberglass flat roof.
I will clad my workshop in feather board too. It looks so bad in those pictures.
wow camera trickery!!!! looking goodJust under. It's 2400 X 4800 mm internal.
cheers dan PM me I am interested - woud like to see how my proposed build will look with pins in it!!it's google sketchup, Kev, used to be freeware but then they made it a paid thing - although i downloaded a cracked version with full features (just have to remember not to update it, heh) - with practise, you can not only do stills but also videos with a camera moving around and between: i made a few virtual happy place pinrooms like this one for fun for myself, and for some friends on here like @Will and @Julian and @johnwhitfield, set to music, uploaded them to youtube. in the sketchup warehouse i also made virtual models of 150 or so pins, so i even did a video for the 2012 Slam, with accurate game lists, before the copyright barstewards silenced it due to my unlicensed use of 'Peace in Mississippi. reminds me, i promised i'd also make one for @ianw at some point. sad eh?i will get a life one day.
i don't want to derail this dude's build thread through, so if you're interested then i can send you some links by pm or take it to another thread
cheers dan PM me I am interested - woud like to see how my proposed build will look with pins in it!!