biglouieuk
Site Supporter
I was following the pinwiki guide, to see what my readings are, out of curiosity and because Hurricane is in the house and the sheds too cold to visit!!
My DC reading is 10.7v and my AC reading is 0.212v
So my cap is ok
I am trying to find out if 10.7v is too high a reading at BR2 + leg. Pinwiki says around 9v is expected.
Just curious really.
My DC reading is 10.7v and my AC reading is 0.212v
So my cap is ok
I am trying to find out if 10.7v is too high a reading at BR2 + leg. Pinwiki says around 9v is expected.
Just curious really.