Hi everyone
Due to space reasons I’ve decided I need to let a few cabs go. I had no plans to ever sell this virtual pinball cabinet, having built a few in the past, this one is a little special and ticks so many boxes for me. Anyway needs must so someone else can now have some fun with it.
I’m sure some of you will recognise the quirky design. It was orignally built by our resident Vpin guru, @Pick Holder, who specced it out with some nice features like force feedback solenoids, under cabinet RGB lighting tied to the game logic, digital plunger, nudge and tilt support etc. Coupled with a huge 4K screen this is a very nic bit of kit.
It has been owned by a few people on here and has largely remained the same spec. In my ownership I have overhauled the PC spec, as the original one wasn’t quite good enough to keep a consistent 60fps at 4K with HDR running. I have also added a third DMD screen which is mounted to the cabinet.
It’s plug and play with hundreds of tables pre installed. More can be added via downloading of the net.
Full spec and videos will be updated shortly.
NEW PC Spec
Intel i7 8700k
16gb DDR 4 ram
RTX 2080 ti graphics card
500gb M.2
Cabinet spec
43 inch 4K playfield
32 inch HD backglass monitor
Pinscape KL25Z controller board for anaolog plunger/buttons/tilt etc
Ultimarc PAC DRIVE to drive LEDs/Solenoids
Feedback solenoids for flippers
RGB cabinet LEDs
£4250 collection from Melksham. Martin knows my place well.
Due to space reasons I’ve decided I need to let a few cabs go. I had no plans to ever sell this virtual pinball cabinet, having built a few in the past, this one is a little special and ticks so many boxes for me. Anyway needs must so someone else can now have some fun with it.
I’m sure some of you will recognise the quirky design. It was orignally built by our resident Vpin guru, @Pick Holder, who specced it out with some nice features like force feedback solenoids, under cabinet RGB lighting tied to the game logic, digital plunger, nudge and tilt support etc. Coupled with a huge 4K screen this is a very nic bit of kit.
It has been owned by a few people on here and has largely remained the same spec. In my ownership I have overhauled the PC spec, as the original one wasn’t quite good enough to keep a consistent 60fps at 4K with HDR running. I have also added a third DMD screen which is mounted to the cabinet.
It’s plug and play with hundreds of tables pre installed. More can be added via downloading of the net.
Full spec and videos will be updated shortly.
NEW PC Spec
Intel i7 8700k
16gb DDR 4 ram
RTX 2080 ti graphics card
500gb M.2
Cabinet spec
43 inch 4K playfield
32 inch HD backglass monitor
Pinscape KL25Z controller board for anaolog plunger/buttons/tilt etc
Ultimarc PAC DRIVE to drive LEDs/Solenoids
Feedback solenoids for flippers
RGB cabinet LEDs
£4250 collection from Melksham. Martin knows my place well.
Last edited: