3D printed models / figures

[Crewey]

Found a discount code GSGSAVE15 to receive 15% off

Ohh awesome, some of the Neca items still in the sale are worth bundling up to get that.

Also @Gonzo some Mezco BM66 -- https://www.zavvi.com/merch-action-figures/mezco-batman-1966-5-points-deluxe-box-set/12717440.html

 

[Gonzo]

Ohh awesome, some of the Neca items still in the sale are worth bundling up to get that.

Also @Gonzo some Mezco BM66 -- https://www.zavvi.com/merch-action-figures/mezco-batman-1966-5-points-deluxe-box-set/12717440.html

Thanks mate, i appreciate that. Funnily enough I've got the full set of Eaglemoss now so I'm just waiting on the armour!!!!

 

[Crewey]

Thanks mate, i appreciate that. Funnily enough I've got the full set of Eaglemoss now so I'm just waiting on the armour!!!!

Nice! My Batman Eaglemoss novel collection has currently been paused after Vol:104 due to Global Supply Issues (I think they're just sacking it off as it's been going 4years)

 

[Gonzo]

Nice! My Batman Eaglemoss novel collection has currently been paused after Vol:104 due to Global Supply Issues (I think they're just sacking it off as it's been going 4years)

That's ridiculous after collecting for such a long time. They need to finish that collection.

 

[HomerRamone]

Good lord £120 !

(Poweslave Eddie is around 30cm)

 

[Sako-TRG]

Good lord £120 !

(Poweslave Eddie is around 30cm)

Hey man, assuming you are gonna run LEDs at some stage on your topper.
Any ideas on where to run them to within the pin, harness and parts required?
I’m thinking of drilling a few holes for the LED eyes, same as @Batman and having the topper illuminated from below.

 

[HomerRamone]

Hey man, assuming you are gonna run LEDs at some stage on your topper.
Any ideas on where to run them to within the pin, harness and parts required?
I’m thinking of drilling a few holes for the LED eyes, same as @Batman and having the topper illuminated from below.

Truth is I don't actually have an Iron Maiden. I just thought it wouldn't hurt to put the holes in to light his eyes up. Or I might just stick it on flea bay. I'm running out of space for all these plastic things I print

IM is a stern though - no idea what they are like to hook mods up to.

 

[Sako-TRG]

^^^Cool, no worries…hoping not too difficult.
Maybe @Batman can chime in.
It’s just getting the correct type of LEDs for the eyes and length of harness etc….

Your Eddie is great, sure it will sell no worries.
I went for trooper Eddie as I have a Pro…lol

 

[Batman]

^^^Cool, no worries…hoping not too difficult.
Maybe @Batman can chime in.
It’s just getting the correct type of LEDs for the eyes and length of harness etc….

Your Eddie is great, sure it will sell no worries.
I went for trooper Eddie as I have a Pro…lol

I just piggyback of the lighting flashers for the cool bonus countdown and gi lights for eyes and the 2 red spot lights

 

[Batman]

i think i used these for the eyes. they have a resistor chart for voltage correction

5mm Round Top Red Breathing / Fading LED - Super Bright

The 5mm fading / breathing round top red led will begin flickering as soon as you apply power to the led.

lighthouseleds.com

 

[Sako-TRG]

i think i used these for the eyes. they have a resistor chart for voltage correction

5mm Round Top Red Breathing / Fading LED - Super Bright

The 5mm fading / breathing round top red led will begin flickering as soon as you apply power to the led.

lighthouseleds.com

Thanks for the input.
Much appreciated man

 

[Sako-TRG]

Haven’t got LEDs for this yet put it’s a quality product.
Hand painted too, quite heavy.

 

[HomerRamone]

It would have been rude not too add these. Think I can call him done now

 

[Batman]

Beginning of my BM66 topper