Selling my Lovely Pusher since it's just that little too big for the space that i have it in currently...
Pics below, however it's a small-ish 2 player (One each on opposite sides). Currently takes 2p's. Just to clarify there are two separate positions (You could put 2p in one side, and i guess 10P on the other (havent tried, however seems perfectly possible as there's little size difference between the size!!
General condition is reasonable - It works, it has a "win" feature where if a coin goes through the slot in the middle of the rear then it will spin the reel on the top of the machine and dependant on what fruit you get depends on your prize!!!! The sliders go backwards and forwards smoothly without juddering. the "speaker" in the top has been disconnected, and also a cooling Fan has been installed to keep things cool
Bad things.... Well as to be expected there's a few scratches, however the general condition is perfectly reasonable and playable. Lights work ok, and I have disconnected the Diverters on the payout doors. Locks have been replaced other than the payout doors which will need two short locks - 5 mins to change if i had the locks!!! (Front perspex doors, Cash box underneath etc all new). Happy to provide as many photos as required - just ask
There's one more "bad" thing. One of the perspex coin inserts has cracked, however somewhere i have a scan of a good one - Get printed to vinyl and stick it on a fresh piece of perspex and job done - Perfect!
So - it's around 170cm high, 70cm wide and approx 1M deep (Player-Player sides).
These usually go for silly amounts of money. People like the small pushers since they will fit in houses and gamesrooms as they fit through the door.
This cost me £450 less than a year ago, and i'm looking for £400 back (Which considering i've given it a good clean and replaced a load of fittings etc i think is reasonable).
Item based in Birmingham (Central-ish) - Must be collected by Buyer. This managed to fit (it WAS tight to be fair tho!) into the back of my W-plate Focus estate, so please remember it'll be a tight fit, and will exceed the recommended weight of your roof bars...... Saying that it's much lighter than a pinball, and would be a great addition to a games room
Pics below :
Pics below, however it's a small-ish 2 player (One each on opposite sides). Currently takes 2p's. Just to clarify there are two separate positions (You could put 2p in one side, and i guess 10P on the other (havent tried, however seems perfectly possible as there's little size difference between the size!!
General condition is reasonable - It works, it has a "win" feature where if a coin goes through the slot in the middle of the rear then it will spin the reel on the top of the machine and dependant on what fruit you get depends on your prize!!!! The sliders go backwards and forwards smoothly without juddering. the "speaker" in the top has been disconnected, and also a cooling Fan has been installed to keep things cool
Bad things.... Well as to be expected there's a few scratches, however the general condition is perfectly reasonable and playable. Lights work ok, and I have disconnected the Diverters on the payout doors. Locks have been replaced other than the payout doors which will need two short locks - 5 mins to change if i had the locks!!! (Front perspex doors, Cash box underneath etc all new). Happy to provide as many photos as required - just ask
There's one more "bad" thing. One of the perspex coin inserts has cracked, however somewhere i have a scan of a good one - Get printed to vinyl and stick it on a fresh piece of perspex and job done - Perfect!
So - it's around 170cm high, 70cm wide and approx 1M deep (Player-Player sides).
These usually go for silly amounts of money. People like the small pushers since they will fit in houses and gamesrooms as they fit through the door.
This cost me £450 less than a year ago, and i'm looking for £400 back (Which considering i've given it a good clean and replaced a load of fittings etc i think is reasonable).
Item based in Birmingham (Central-ish) - Must be collected by Buyer. This managed to fit (it WAS tight to be fair tho!) into the back of my W-plate Focus estate, so please remember it'll be a tight fit, and will exceed the recommended weight of your roof bars...... Saying that it's much lighter than a pinball, and would be a great addition to a games room
Pics below :
Last edited:
