20 pin connector

[Cryptkeeper]

Need to replace one of these in my recently acquired black pyramid,
Its the trailing type so not on a PCB.Its a quick disconnect for the displays.
What are my options here?

Thanks!

 

[astyy]

It's probably Molex Wire to Wire - Standard 0.093" (bigger) or Standard 0.062" (smaller), measure the pitch to tell which. You need the male socket housing, female socket housing, male crimp pins, female crimp pins and the infamous crimp tool to make up the connector. Andy pinballmania sells both sizes individually or places like RS but sometimes in bulk. I'm not sure about 20-way but you can always go bigger and leave some circuits empty.