Pie Man Site Supporter Joined Apr 16, 2016 Messages 278 Location Blackburn Apr 13, 2020 #1 Coin slot light not lighting, iv tested back to J2 White-Violet then from J2 back to J 104 on the PDB and am not getting a voltage. Any thoughts? Would anyone recommend bypassing and linking into another sauce ?
Coin slot light not lighting, iv tested back to J2 White-Violet then from J2 back to J 104 on the PDB and am not getting a voltage. Any thoughts? Would anyone recommend bypassing and linking into another sauce ?
strobey Site Supporter Joined Jul 24, 2011 Messages 1,560 Location Derbyshire Alias Tim Apr 13, 2020 #2 Couple things.. 0V measured at J104? Is the rest of the GI ok? Are you sure your meter is set to volts AC? Tim
Couple things.. 0V measured at J104? Is the rest of the GI ok? Are you sure your meter is set to volts AC? Tim
Pick Holder Site Supporter Joined Jul 18, 2016 Messages 5,389 Location Bournville, Birmingham. Apr 13, 2020 #3 Instide the door on the left hand side is a large board which is the coin interface board. Has lots of connectors and you usually find one of these needs pushing back in with a IDC tool. Would check that first.
Instide the door on the left hand side is a large board which is the coin interface board. Has lots of connectors and you usually find one of these needs pushing back in with a IDC tool. Would check that first.