Sticking down ramp flaps

[Steve Arnold]

Hi guys, i have a no dear table I am shopping. One of the metal ramp flaps won’t stay down close to the playfield and lifts up about 1/2cm. I’m sure I have seen some tables with like double sided tape to hold them down.
Any ideas if I’m right in thinking this and if so here could I get the tape from? It’s realy thin about the thickness of cello tape.
It’s almost unplayable as is so need to sort it.

Thanks
STEVE

 

[Moonraker]

Lots to chose from, any double sided tape should manage the job. eg. https://www.amazon.co.uk/Scotch-665H1263-Double-Sided-Tape-Transparent/dp/B000NWFQ68/

 

[keith b smith]

Hi Steve best to take the ramp off and bend the flap down a little so it fits flush again

 

[stumblor]

Hi guys, i have a no dear table I am shopping.

I've heard about this table. Is that the one where you ask your wife if you can have another pinball and she flatly rejects you, so you buy it anyway?

 

[Steve Arnold]

Thanks for the replies guys. The wife has given up saying I can’t buy anymore machines