Jady,
I do seem to have been sent any payment details.
Can you check and please resend, thanks.
D.
I do seem to have been sent any payment details.
Can you check and please resend, thanks.
D.
I might do a power spur as I have a colour DMD inbound from Retro City and want to light the speak panel car break lights and possibly the mini TV with film clips Snack Bar mod can grab the existing as I've put LED in now which takes the heat of the circuit.@David_Vi @Lecari 's game looks great.
I have had a few people experiencing the snackbar jumping and the 2 possible causes are:
- if the scoop bracket is just touching the Snackbar Mod Stainless Steel Plate - ideally it should be should 1-2mm off - if touching it is transferring the impact to the magnet mounting as the scoop cops a hug hit at times
- the snackbar has bolt heads that magnetise to a 3 sets of dual set of magnets so the mod can be easily removed for maintenance. I have a jig for setting the magnets in place so the Snackbar top sits squarely on the plate / magnets but if the mods stainless steel plate is slightly curved once installed due to playfield curve then the 3 bolts in the snackbar top can be wound down a 1/4 or 1/2 turn to get the bolt heads sitting flush on the magnets
I will add the above to the manual to help people and I have the 3d print file for the magnet setting jig if anyone every needs it. Also if adjusting the magnets do not crank the bolt down - just lightly nip the bolt otherwise the magnet may crack. There is a spare magnet in the goodie bag.
As for power I think if memory serves me correctly 10 leds equal 1 incandescent bulb in power draw, so the Open Sign isn't pulling much but the Snackbar is pulling the equivalent of 2 bulbs.
The color dmd and lcd hologram are the killers with power and CFTBL has always been on the limit with power
not sure if the UK games come with a power outlet at the box near the cabinet switch underneath as then adding a power supply is not a problem, sadly Aussie games did not come standard with this but an electrician can fit one.
if the scoop bracket is just touching the Snackbar Mod Stainless Steel Plate - ideally it should be should 1-2mm off - if touching it is transferring the impact to the magnet mounting as the scoop cops a hug hit at times
As for power I think if memory serves me correctly 10 leds equal 1 incandescent bulb in power draw, so the Open Sign isn't pulling much but the Snackbar is pulling the equivalent of 2 bulbs.
The color dmd and lcd hologram are the killers with power and CFTBL has always been on the limit with power
You may already know David; if not for routed out holes some Gorrila Wood Glue and Cocktail sticks works well.I tried tightening it but think I need to pack and glue the holes.