Paul R Owen Site Supporter Joined Nov 15, 2011 Messages 1,779 Location Southport Oct 7, 2017 #1 I think I need one as the shark flipper does not work, on Baywatch. There are 2 of these located deep in the cabinet! Has anyone got one?
I think I need one as the shark flipper does not work, on Baywatch. There are 2 of these located deep in the cabinet! Has anyone got one?
PinballDaze Site Supporter Joined Feb 20, 2012 Messages 1,496 Location Cwmbran.South Wales Alias Pinball Dave Oct 7, 2017 #2 I have one in stock. Dave Pinballdaze.
OP OP Paul R Owen Site Supporter Joined Nov 15, 2011 Messages 1,779 Location Southport Oct 7, 2017 #3 Thanks Dave - one of the 2 lights on the board doesn't light. So I swapped the boards over. Same missing light BUT now on the other board. Confused now? Why does the fault swap to the other board?
Thanks Dave - one of the 2 lights on the board doesn't light. So I swapped the boards over. Same missing light BUT now on the other board. Confused now? Why does the fault swap to the other board?
PinballDaze Site Supporter Joined Feb 20, 2012 Messages 1,496 Location Cwmbran.South Wales Alias Pinball Dave Oct 7, 2017 #4 Board 1 controls the Right side. Board 2 is for the left. Check left flipper button switches. Clean/adjust. If working, led will light on board.
Board 1 controls the Right side. Board 2 is for the left. Check left flipper button switches. Clean/adjust. If working, led will light on board.
OP OP Paul R Owen Site Supporter Joined Nov 15, 2011 Messages 1,779 Location Southport Oct 7, 2017 #5 The right flipper button activates the lower right flipper. But not the upper right flipper. Does that mean that flipper-button is ok?
The right flipper button activates the lower right flipper. But not the upper right flipper. Does that mean that flipper-button is ok?
PinballDaze Site Supporter Joined Feb 20, 2012 Messages 1,496 Location Cwmbran.South Wales Alias Pinball Dave Oct 7, 2017 #6 Check the switch stack inside the cabinet.
OP OP Paul R Owen Site Supporter Joined Nov 15, 2011 Messages 1,779 Location Southport Oct 7, 2017 #7 Bloody hell, Dave, you have just fixed it! Never realised that there were 2 switches there! You are a star.
Bloody hell, Dave, you have just fixed it! Never realised that there were 2 switches there! You are a star.
PinballDaze Site Supporter Joined Feb 20, 2012 Messages 1,496 Location Cwmbran.South Wales Alias Pinball Dave Oct 7, 2017 #8 Best get on with some flipping