£2,700, and I am open to offers
Very reluctant sale. Been running my shed on 13 games for well over a year and it was only designed for 12. I need to let a game go. I did masses of refurbishment work to this game as documented here ....
https://www.pinballinfo.com/community/threads/funhouse.24783/
This game has been used in Midlands League and UKCS events. It has been to NERG in Gateshead and Northern Lights in Manchester. It has been to stay with @mark9. It has never broken down at an event and has been a very reliable game.
It has been carefully adjusted, plays very well and everything works as it should.
The good:
Phoenix Arcade decals
New ramps
New plastics
Ciffys for ramps plus holes
New flippers, superbands and fully rebuilt mechs
Every mech dismantled and rebuilt with new parts as necessary
New rubbers
New plastic posts
New shooter rods
New mirror drop weldment
New locking mech disc
LEDs with a few incandescents, where I prefer them
Playfield metal all tumbled
Resprayed coin door
New line filter
The bad:
Mylar has bubbled in a few places above inserts
Small amount of playfield wear (see snaps, esp: left flipper ramp return, steps ramp ball drop, to right of mirror)
Grain of sand sized blemish to decal near right backbox hinge - touched up, see photo
It lives in my pinball shed so it is possible to collect whilst observing social distancing. Either I could pack it up 72 hours before collection. Or I could leave it up for you to check and pack it up yourself. I have a good sack barrow and hydraulic truck which could be quarantined for 72 hours for you to use. Martin lives 45 minutes from me and often drives within a mile of my house as I live just off the A1.
Very reluctant sale. Been running my shed on 13 games for well over a year and it was only designed for 12. I need to let a game go. I did masses of refurbishment work to this game as documented here ....
https://www.pinballinfo.com/community/threads/funhouse.24783/
This game has been used in Midlands League and UKCS events. It has been to NERG in Gateshead and Northern Lights in Manchester. It has been to stay with @mark9. It has never broken down at an event and has been a very reliable game.
It has been carefully adjusted, plays very well and everything works as it should.
The good:
Phoenix Arcade decals
New ramps
New plastics
Ciffys for ramps plus holes
New flippers, superbands and fully rebuilt mechs
Every mech dismantled and rebuilt with new parts as necessary
New rubbers
New plastic posts
New shooter rods
New mirror drop weldment
New locking mech disc
LEDs with a few incandescents, where I prefer them
Playfield metal all tumbled
Resprayed coin door
New line filter
The bad:
Mylar has bubbled in a few places above inserts
Small amount of playfield wear (see snaps, esp: left flipper ramp return, steps ramp ball drop, to right of mirror)
Grain of sand sized blemish to decal near right backbox hinge - touched up, see photo
It lives in my pinball shed so it is possible to collect whilst observing social distancing. Either I could pack it up 72 hours before collection. Or I could leave it up for you to check and pack it up yourself. I have a good sack barrow and hydraulic truck which could be quarantined for 72 hours for you to use. Martin lives 45 minutes from me and often drives within a mile of my house as I live just off the A1.
Attachments
Last edited: