Have a Pin2dmd that I have just fitted, it has a blank screen on start up, when you turn off the pin and turn back on, the display works. I believe it's a rest issue. Any idea's how to fox it. Thanks.
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Pin2dmd issue
- Thread starter Banzaipinabll
- Start date
An intermittent blank screen, I would guess is a power issue. Do the board LED lights come on (near the buttons), even when the panel is not?
Is there any way you could test the display with a separate 12V or 5V (connected to the appropriate connector) power supply? A chunky power supply would be a good idea - 2+ amps.
Is there any way you could test the display with a separate 12V or 5V (connected to the appropriate connector) power supply? A chunky power supply would be a good idea - 2+ amps.
OP
OP
Not intermittent as such. It happens every time you turn it on, you then have to cycle power to get a display. Will swap to another pin that has a fully working display and will try a external power supply, thanks
