Does anyone know where I can get those plastic pcb stand offs which always snap. In particular the larger ones for mounting displays. My pinbot scores displays have several snapped ones.
Thanks all
Gaz
Thanks all
Gaz
Wanted PCB stand off thingys
- Thread starter Spandangler
- Start date
[mention]myPinballs [/mention] ?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
This is where I get mine from, there are various sizes
https://uk.farnell.com/wurth-elektr...t-12-7mm-nylon/dp/2987529?CMP=i-ddd7-00001003
https://uk.farnell.com/wurth-elektr...t-12-7mm-nylon/dp/2987529?CMP=i-ddd7-00001003
OP
OP
Already spoken to Jim mate. He’s at a loss too.
thanks stumblor but that’s not the ones I’m thinking.
It’s the white ones which you pinch the little fins in to remove the pcb.
These?
Sent from my iPhone using Tapatalk
ASS - Valcon Self-adhesive Nylon Square PCB Pillar : Toby Electronics
Valcon - 20mm Square Adhesive Base; For 4mm PCB Hole; 1.2mm ~1.7mm PCB Thickness;
www.toby.co.uk
Sent from my iPhone using Tapatalk
OP
OP
I think this is the one you need;
https://www.marcospecialties.com/pinball-parts/MP-12
https://www.marcospecialties.com/pinball-parts/MP-12
OP
OP
These have gotta be close
https://uk.farnell.com/essentra-com...0002/pcb-mounting-spacer-nylon-6-6/dp/2892062
https://uk.farnell.com/essentra-com...0002/pcb-mounting-spacer-nylon-6-6/dp/2892062
Or these (for the win)
https://uk.farnell.com/wurth-elektronik/709955000/pcb-spacer-support-15-9mm-nylon/dp/2987655
https://uk.farnell.com/wurth-elektronik/709955000/pcb-spacer-support-15-9mm-nylon/dp/2987655
T
That's the same one I posted. You're just trying for the steal.
OP
OP
Haha. Thank you both so much. You’re both winners in my eyes 
He’s huge in Canada [emoji23]
