Mirror Blades Installed

Marcel

Active Member
Feb 26, 2017
271
71
28
Huddersfield
#1
Finally got round to installing the blades. Thanks @ChrisB for the supply.

I've shown before & after lights on & off.

Very happy with the effect and product quality.


Sent from the comfort of my Sofa
 
Likes: Durzel
OP
OP
Marcel

Marcel

Active Member
Feb 26, 2017
271
71
28
Huddersfield
#3
I just used one countersunk screw per side as Chris provided, as well as the fat top box hole.
Seems to do the job just fine, there was a further countersunk screw available mid blade but I'm guessing this isn't necessary and that it may give possible rise to snagging, that's pure educated guesswork though.

Sent from the comfort of my Sofa
 
OP
OP
Marcel

Marcel

Active Member
Feb 26, 2017
271
71
28
Huddersfield
#4
As for tips, fit either side first using the rear fat hole & make sure it sits in position whilst holding in place.

Eye a line through to make top edge of blade parallel to the cabinet edge just beneath the glass.
This is to get a perfect level front to back finish.

Then screw whilst it's level. It's easy peasy.

Sent from the comfort of my Sofa