Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi I am struggling to get a certain few lights working on my Fire pin. I’ve checked bulbs connections and all fuses. It’s the few on the building in the picture.
Can any one shed any light on what the problem could be.
Ok so I need to trace these two wires back and see where they go. I have been concentrating
on the other bank of cables on the right hand side. Thankyou
Ok I have traced the string green/white green back to the back box board ( I assume for GI)
the solid green goes to a small board ( see picture) will I be ok putting a bulb on both these wires? Just so I can eliminate it down to the circuit board which houses the bulbs that I can’t get working.