Gigi restoration

[Exeterarcade]

So got this one and he needs some TLC I’m very noob when it comes to pinball tables.
All turns on ok tens and hundreds counter works fine but units is not.
This is the first of manny jobs I wanna work on any tips on troubleshooting the units real not working?
Also need new rubbers as their all gone so any tips on wear to get replacements ide love too.
Many thanks
Damien

 

[Toxteth O'Grady]

That needs some work, good luck and keep posting your progress.

 

[Moonraker]

any tips on troubleshooting the units real not working?

http://www.pinrepair.com/em/index.htm

 

[Doug]

What happens when you press the S start relay? All reels must zero before a game can commence. Remember that there is 240v on the coin door and usually, mains on any plastic coated wire going to other relays, etc so be warned!
To avoid tears, do read that link to pinrepair before you begin tinkering. Try to avoid taking bits apart unless you know what you are doing, and try to fix one fault at a time! I've repaired quite a few Gigi's and they are a hard one to beat if set up properly, good luck.
You might want to join Pinside, in the USA, where many EM specialists there can give help and advice.
Rubber kits can be bought from Pinball Resource or Marco specilalites in the USA.