Dracula owners help!

[newdos]

Just rebuilding the playfield and wiring all 20 mechs back up and seem to have a spare wire on or near the drop target. see pic below

Its a violet/green wire. The diagrams show it as a tie back diode for the drop target solenoid but just a bit dubious putting a violet green and a blu brown together on the same lg of the solenoid, so I wonder if someone could do me a favout and take a pic of the wiring to the drop target please ?

cheers

Kev

 

[M4carp]

This any good? And it’s not my soldering

 

[newdos]

thanks man thats spot on - so the thin violet green goes with the two thick violet green 50volt power leads

Cheers

kev