New flyback, all caps changed and some resistors.That's some serious hum, defo needs the power supply going over and wiring checked, Not sure what you mean by monitor rebuilt? Like chassis put back on and a few caps changed?
I would check your -5v. as the last flash (4th) is the speech generator chip and it needs -5v to run.Squawk and Talk doesn't work and stops on three flashes. I have a @myPinballs replacement and swapped that in, but interestingly that also stops at three flashes. A bit stumped and I'll need to look at this further. But need two functioning dual amp boards for it to work properly anyway so not an immediate problem.
Hey fella,I would check your -5v. as the last flash (4th) is the speech generator chip and it needs -5v to run.