Hi guys, looking to move on my Data East Hook. will put on eBay if no interest on here but thought I would check first.
Overall in good condition
DMD works fine, no missing dots. Cabinet is in good shape. No noticeable fade. Usual wear on back and around the legs. The power supply has been replaced for a rotten dog one about 3 months ago. The machine has full LED’s including flashers. Has the original Data East red plunger. Rope light working as it should. Playfield is in really good shape, hardly any wear, only but is the usual wear around the scoop. A protector would cover most of this. A very clean example. A few scratches on the glass. A lot of the sockets under the playfield do have some oxidation on then where it must have been store in a cold environment at some point in its life. Nothing that effect anything. The flippers have been completely rebuilt including coils. All plastics in good shape, coaster ramp is good, shooter lane ramp has had a couple of metal strips added at some point . Some target decals have started to come up so good probably do with a new set of decals to finish it off.
legs are decent, coin door is fine could probably do with a respray if you really wanted.
translite is in really nice shape. running the latest official rom, but hear the newer one is better.
Original topper in good shape
Will also include a manual, it is a reprint one but good quality from pinball heaven
I haven't yet used Martin but sure if you can arrange it would be fine
Price reduced to £1500.
I also have it listed on eBay but rather sell on here
will grab some more photos if needed
Overall in good condition
DMD works fine, no missing dots. Cabinet is in good shape. No noticeable fade. Usual wear on back and around the legs. The power supply has been replaced for a rotten dog one about 3 months ago. The machine has full LED’s including flashers. Has the original Data East red plunger. Rope light working as it should. Playfield is in really good shape, hardly any wear, only but is the usual wear around the scoop. A protector would cover most of this. A very clean example. A few scratches on the glass. A lot of the sockets under the playfield do have some oxidation on then where it must have been store in a cold environment at some point in its life. Nothing that effect anything. The flippers have been completely rebuilt including coils. All plastics in good shape, coaster ramp is good, shooter lane ramp has had a couple of metal strips added at some point . Some target decals have started to come up so good probably do with a new set of decals to finish it off.
legs are decent, coin door is fine could probably do with a respray if you really wanted.
translite is in really nice shape. running the latest official rom, but hear the newer one is better.
Original topper in good shape
Will also include a manual, it is a reprint one but good quality from pinball heaven
I haven't yet used Martin but sure if you can arrange it would be fine
Price reduced to £1500.
I also have it listed on eBay but rather sell on here
will grab some more photos if needed
Attachments
Last edited: