For Sale Circuit board clear out.

[pinballmania]

Postage is £4.95 on top of total amount.

4 Rottendog Power Supplies. NOT working. Previous repairs / missing parts. Note the pcb can be used for various power supply applications. The original use is marked at the centre of the board. Some components were not stuffed originally but a few are missing that would be required. Boards are for spares or repair only. Boards are marked A-D top right corner for identification. £10 each plus postage.

 

[pinballmania]

E. Rottendog gottlieb system 80 psu. Not working. £10

 

[pinballmania]

F. Gtb System 80 power supply. Not working.

 

[pinballmania]

G. 3 x Corroded MPU 95. £10 for all three.

 

[pinballmania]

H. Rottendog MPU326. Not for the faint hearted. Believed to have had solenoid voltage backed up the switch matrix. Multiple ic failures likely. Some previous repair attempts. £10.

 

[pinballmania]

I. Wpc-s cpu. Missing u6. Dirty. No corrosion. Not working.

 

[pinballtoys]

H. Rottendog MPU326. Not for the faint hearted. Believed to have had solenoid voltage backed up the switch matrix. Multiple ic failures likely. Some previous repair attempts. £10.

yes please Andy, love a challenge

 

[pinballmania]

J-N. Wpc89 cpus. Corroded. Previous repairs. £5 each plus postage.

 

[Paul]

Hiya Andy,
Could I take the rotten dogs in the first post, and the system 80 stuff in the second and third posts if still available please?
Cheers
Paul

 

[pinballmania]

Sold items will be added to customer order section of shop. You can add parts if needed or just check out and pay.

 

[pinballmania]

Hiya Andy,
Could I take the rotten dogs in the first post, and the system 80 stuff in the second and third posts if still available please?
Cheers
Paul

Sure. Adding to shop for you.

 

[pinballmania]

O. System 80 cpu. Corroded. £10

 

[pinballmania]

P. System 80 cpu. Assumed not working. £20. No corrosion.

 

[pinballmania]

Q. Williams system 11a. Heavily corroded. Lots of spares could be harvested. Transistors , power resistors etc. £10

 

[pinballmania]

R. Data east cpu. Not tested. Assumed not working. No corrosion but a **** poor previous repair £20

 

[Ragnar1057]

I'd like the WPC89 CPU boards please

 

[pinballmania]

Adding to shop.

I'd like the WPC89 CPU boards please

 

[pinballmania]

Customer Orders | Pinball Mania Parts

 

[Mfresh]

Could I take the Sys 11a board please Andy

 

[pinballmania]

yep

System 11a corroded board - Mfresh

 

[ronnie63]

View attachment 225270View attachment 225271
R. Data east cpu. Not tested. Assumed not working. No corrosion but a **** poor previous repair £20

Can I take this please andy?

 

[pinballmania]

Can I take this please andy?

Yep

Data East board - Dent

 

[Chilpin]

Can I have the Data East board? Thanks

 

[pinballmania]

Can I have the Data East board? Thanks

Already gone. Sorry.

 

[BrianSoton]

was after mpu326 but see it’s gone

 

[pinballmania]

G. 3 x Corroded MPU 95. £10 for all three.

Still available

 

[pinballmania]

I. Wpc-s cpu. Missing u6. Dirty. No corrosion. Not working.

Still available

 

[pinballmania]

O. System 80 cpu. Corroded. £10

Still available

 

[pinballmania]

P. System 80 cpu. Assumed not working. £20. No corrosion.

Still available

 

[pinballmania]

Everything else is sold or spoken for awating payment. May add more later.