Need to free up some space so this is first
Good:
Bride of pinbot fitted with BOP2.0 kit. 2nd run and all the goodness this brings.
Refurbished cabinet sprayed pearlescent black with metalflake added.
Fitted with the NLA BOP2 decals
New playfield
New plastics
New bride helmet
FULL LED conversion using TruLED lamps (the best IMHO, no ghosting)
Pink illuminated star posts, all posts were replaced with new
New pop bumpers and LED lighting
Shaker motor fitted (this is not normally possible)
UV lights fitted to speakers (uprated as part of the kit)
All done by previous owner
also fitted
My UV flipper mod kit
My BOP 2.0 inner cab and backboard decals
bad:
Tiny bit out of the head decal (see pic).
Head can be flaky, I have been informed that a new motor may cure this. (fault is not the switch or relay to the best of my knowledge)
Good:
Bride of pinbot fitted with BOP2.0 kit. 2nd run and all the goodness this brings.
Refurbished cabinet sprayed pearlescent black with metalflake added.
Fitted with the NLA BOP2 decals
New playfield
New plastics
New bride helmet
FULL LED conversion using TruLED lamps (the best IMHO, no ghosting)
Pink illuminated star posts, all posts were replaced with new
New pop bumpers and LED lighting
Shaker motor fitted (this is not normally possible)
UV lights fitted to speakers (uprated as part of the kit)
All done by previous owner
also fitted
My UV flipper mod kit
My BOP 2.0 inner cab and backboard decals
bad:
Tiny bit out of the head decal (see pic).
Head can be flaky, I have been informed that a new motor may cure this. (fault is not the switch or relay to the best of my knowledge)
Last edited: