What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Complete Bram Stoker's Dracula - (yes I'm doing another one)

Ok finally resolved the big issues!

Thanks to Simon (will update an @ reference when I find his name on pinfo) for the help.

DMD issue was resolved by replacing the ribbons and cleaning the contacts

Opto firing was a faulty receiver opto. Unsoldered and replaced.

Opto for motor firing constantly was caused by the long range opto board. I had told him to replace this as it's flakey as f and I'm glad I did as it was! Replacement board was in the stuff he bought ready for the decals.

I also switched out the large opto board with my old one as someone had put in a vertical mounted one? Also it was loose and had burn marks so I didn't trust it.

PXL_20221009_172042482.jpg
Final issue to resolve is the sound, but we've got Pinsound so will just put that in.
 
Sound issue resolved. Pinsound plus installed. Something must be up with the board itself.

PXL_20221009_202708076.jpg

PXL_20221009_202709988.jpg
 
So put the old driver board back in today and the GI, Solenoids and inserts lights didn't work.

Spoke to @Ragnar1057 who concluded it must be j113 ribbon connector. He was bang on.

When I took the board off at the start it had a new ribbon cable there which I thought odd as the other ribbons were old and knackered. Upon inspection of the board putting bit back I noticed pin 1 was practically bent 90 degrees!

Trying to bend it back, no dice the pin came straight off... 🫤

Board is going off for repair.

Meanwhile I installed the flex flashers and installed the speaker panel and backglass.

PXL_20221010_122925656.jpg

PXL_20221010_122931071.jpg

Installed the ColourDMD but haven't added the chroma file yet.

PXL_20221010_131643114.jpg

PXL_20221010_131715520.jpg

Prepping the flex flashers

PXL_20221010_135447398.jpg

Hot glue to the rescue

PXL_20221010_163145462.jpg

Old Translite

PXL_20221010_163814610.jpg

New Backglass

PXL_20221010_172335823.jpg

Installed the hinges

PXL_20221010_202317973.jpg
 
s000m said:
So put the old driver board back in today and the GI, Solenoids and inserts lights didn't work.

Spoke to @Ragnar1057 who concluded it must be j113 ribbon connector. He was bang on.

When I took the board off at the start it had a new ribbon cable there which I thought odd as the other ribbons were old and knackered. Upon inspection of the board putting bit back I noticed pin 1 was practically bent 90 degrees!

Trying to bend it back, no dice the pin came straight off... 🫤

Board is going off for repair.

Meanwhile I installed the flex flashers and installed the speaker panel and backglass.

View attachment 183423

View attachment 183424

Installed the ColourDMD but haven't added the chroma file yet.

View attachment 183425

View attachment 183426

Prepping the flex flashers

View attachment 183427

Hot glue to the rescue

View attachment 183428

Old Translite

View attachment 183429

New Backglass

View attachment 183430

Installed the hinges

View attachment 183431
Click to expand...
Back glass is super nice
 
Full set of comets are on order. Will update final pictures when all is installed/repaired.
 
Also forgot I added back a lamp into the front pop bumper. Dear God trying to solder the wires back under the playfield was a nightmare.

PXL_20221010_074914270.jpg

PXL_20221010_074915740.jpg

PXL_20221010_081038938.jpg

PXL_20221010_113048047.jpg

PXL_20221010_114203756.jpg
 
On the final stretch now.

GI was short 6 bulbs, David from Retro Arcade Specialists is sorting it out for me.

@Ragnar1057 came through with a fast and professional repair on the board. Recapped all the capacitors and sorted the J113 connector.

PXL_20221017_094358235.jpg

PXL_20221017_094400176.jpgPXL_20221017_094402219.jpg

He also did an excellent job modding the love never dies lamp board so I could install it flush below the ColorDMD.

PXL_20221017_130805944.jpg

PXL_20221017_130802824.jpg

PXL_20221017_132315009.jpg

PXL_20221017_131219861.jpg
 
Next up I had to resolve some lamp issues on the inserts on 3 PCB'S, added solder and reflowed header pins and pads.

One is still playing up but I think it's the wiring. Will likely need to repunch.
PXL_20221017_105640787.jpg
 
Machine is nearly done now. Added the chroma file to the ColourDMD and added the sound package.

Also replaced the knackered apron with mine.

Final elements:

Resolve (if I can) long range opto issue.
Replace missing 6 GI Bulbs
Adjust lighting arrangement in backbox.

PXL_20221017_145630138.jpg

PXL_20221017_153657924.jpg
 
Full Capacitor replacement is the best thing to do with our 30 year old machines, Ive done all mine and everyone had bad readings on the meter.
 
You must log in or register to reply here.
Back
Top Bottom