Addams Family - Coin Mechanism needed

[PaulTAF]

Hi
I have posted previously for this but had no luck locating one. I currently have a euro coin mech but want UK one. I can't get this one reprogrammed as it no one knows/uses it anymore.
Pictures attached of existing coin mech and the con door and interface. Any help/advice appreciated.
Thanks
Paul

 

[myPinballs]

I’ve got a pile of coin control c220 mechs that would work. They are on old £1 though so would need updating

 

[mufcmufc]

Do you have a pic of the front of the coin door and a measurement of the mech? It doesn't look to me like a C220 would fit, I have C220s on new coins but I think you might need to get a UK door

 

[Paul]

Looks more like a C120 size... which is interesting - Could you take a pic of the side of the inside of the coin door and post it please?? If you can stick a ruler next to it, it would help

EDIT : DOH!! And then i read @mufcmufc 's post above

 

[mufcmufc]

Looks more like a C120 size... which is interesting - Could you take a pic of the side of the inside of the coin door and post it please?? If you can stick a ruler next to it, it would help

EDIT : DOH!! And then i read @mufcmufc 's post above

Yeah I thought it looked more like SR3 or C120 size, the coin wiring has been put into a 14 pin plug by the looks of it and an SR3 is 10 pins but then so is the mech pictured so it should work

 

[PaulTAF]

Do you have a pic of the front of the coin door and a measurement of the mech? It doesn't look to me like a C220 would fit, I have C220s on new coins but I think you might need to get a UK door

Here's the front of the door and the measurements for the mech
All help advice appreciated, just want to know what I need to do

 

[Matt Vince]

When changing the door on a euro machine to a UK spec, you may also need a different interface board. (Or at least add in the missing pins)

 

[Paul]

ok thats C120 size... 102mm x 89mm

What connections do you have from the machine into it?? Looks like it's this one???

Also, as Matt says above, what does the cable connect to in the machine? Is there a board?

 

[mufcmufc]

He pictured it already Paul, pic 2 first post. Seems to be 12v coin 1 and ground

 

[PaulTAF]

ok thats C120 size... 102mm x 89mm

What connections do you have from the machine into it?? Looks like it's this one???

View attachment 93803

Also, as Matt says above, what does the cable connect to in the machine? Is there a board?

Hope this helps - PaulTAF

 

[PaulTAF]

So should I be looking for a C120 mech? and if so, does anyone have one I could try, please