Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
250 v 1/4 amp fuse
- Thread starter rockhouse
- Start date
That'll be a 250mA Slow blow... what size?? 20mm 0r 32mm?
32 mm
they only seem to have the 20 mm ones
32mm is the same as 1 1/4" which they have in stock 60p each.
Sent from my SM-G960F using Tapatalk
Sent from my SM-G960F using Tapatalk
aah must have missed that will put the glasses on thanks
do you have a link for them had a look but cant see them
Can't get a link but here is the checkout screen. Search under fuses.
Sent from my SM-G960F using Tapatalk
Sent from my SM-G960F using Tapatalk
I assume you mean the dot matrix board which outputs the 62 volt and HT lines. Williams specify 3/8 A slow blow for both fuses on the board.
CPC have 400 mA, 32 mm fuses at https://cpc.farnell.com/siba/70-059-61-0-4a/fuse-0-4a-time-delay-6-3x32mm/dp/FF03219.
RS are out of stock at this time.
CPC have 400 mA, 32 mm fuses at https://cpc.farnell.com/siba/70-059-61-0-4a/fuse-0-4a-time-delay-6-3x32mm/dp/FF03219.
RS are out of stock at this time.
thanks now sortedCan't get a link but here is the checkout screen. Search under fuses.
Sent from my SM-G960F using Tapatalk
I have two Getaways at this time and they both have original fuses which are marked 3 /8 Amp AS - nearest equivalent is 400 mA. I have not put an ammeter in circuit so cannot confirm if 250 mA or 0.25 A is OK.
He doesn't have a High Speed Getaway.
He has a High Speed.
Sent from my SM-G960F using Tapatalk
He has a High Speed.
Sent from my SM-G960F using Tapatalk
not a problem at least you tried to help
much appreciated
