Wanted WPC89 Line in Connector

[Paul]

Hi all,

Looking for a power in (Mains) connector for a WPC Transformer... Needs to connect to the connector in the picture below (so therefore "Female pins")... Would usually be part of the Power side-loom in WPC89 machines... (BR, BSD, BoP, CftBL, DW, FH, FT, GI, HD, HS2, Hot_Shots_Basketball, Hurricane, PZ, Slugfest_92, T2, TAF, TAFG, TZ, WH2O).

Happy with either a pointer to a source (UK), or maybe someone who has an old look with this on (that has enough cable on there for me to connect to!)...

Thanks

 

[CHRIS B PINBALLS]

Pinball mania

 

[Paul]

Pinball mania

Andy has the lines out.. but not the line in...

 

[MadNat]

I’ve looked around for those for ages… never found an exact match.

I decided to swap both sides with a slightly different part. Let me know if that’s something you’d consider - and I’ll happily share part numbers I used.

 

[CHRIS B PINBALLS]

Andy has the lines out.. but not the line in...

have you asked him

 

[Paul]

have you asked him

Yes Emailed pics etc - "The primary is a larger obscure size, which I don’t stock."

On the plus side, i have ordered all the secondary connectors from Andy, so all good there

I’ve looked around for those for ages… never found an exact match.

I decided to swap both sides with a slightly different part. Let me know if that’s something you’d consider - and I’ll happily share part numbers I used.

Many thanks, and a sensible idea - was trying to keep the Primary side Original - if i cant then i may just leave the connector as is, and T off the feed cables and manually "loop" pins 3 and 9 - so it's usable in a machine in the future