anyone got one of these please.
for barracora
for barracora
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Found it! williams drop target reset plate
- Thread starter AlanJ
- Start date
Asiapinball
Site Supporter
01-10380 DROP TARGET RESET PLATE WILLIAMS Pinball SINGLE | eBay
Find many great new & used options and get the best deals for 01-10380 DROP TARGET RESET PLATE WILLIAMS Pinball SINGLE at the best online prices at eBay! Free delivery for many products.
www.ebay.co.uk
Is this the correct one. Maybe they are on pinballinfo as they always have loads of parts.
Asiapinball
Site Supporter
I think you may need 01-6983. Swallow amusements have them.
Asiapinball
Site Supporter
Scroll down. They have 3 types in stock.
I was thinking that. (That they be easy to make - not that I have made them myself)
Wonder if a 3d printed one would work
Probably just snap - but
I was in my parts stash last night and rummaged through boxes of williams stuff but no older drop target banks. weak point on williams 80s games whereas gottlieb and bally built like tanks. hence most designs have targets not in the direct flipper line. why firepower was switched to spots as prototype drops just smashed on site test
David retro
Site Supporter
Plate Reset - Single Bank
Plate Reset - Single Bank #01-8414 Single plate bank reset. Specs: Overall height: 1-3/4" Neck length: 5/8" Neck width: 5/16" Head length: 1-1/8" Head width: 3/4" Hole diameter: 3/16" Hole distance from top edge: 1/2" on center Reference: 01-8414 Weight: 0.21 oz
retroarcadespecialists.co.uk
OP
OP
thanks to Bob @pinballtoys - much appreciated.
Funny how I've had the same issue with the same Barracora 
The last A in Barracora wasn't reset. The coil sleeve wasn't flanged and doesn't have an end so was freely sliding up and down the coil meaning the reset plate could go too high and slam into the metal, which has bent the end of the reset plate. I've bent it back but you can see how brittle it is now. It won't be long before it breaks.
One of the other drops in the same bank has already broken but has enough length left to do the job.
Looks like swallow amusements are the best bet, but only two in stock
The last A in Barracora wasn't reset. The coil sleeve wasn't flanged and doesn't have an end so was freely sliding up and down the coil meaning the reset plate could go too high and slam into the metal, which has bent the end of the reset plate. I've bent it back but you can see how brittle it is now. It won't be long before it breaks.
One of the other drops in the same bank has already broken but has enough length left to do the job.
Looks like swallow amusements are the best bet, but only two in stock