- Joined
- Sep 11, 2012
- Messages
- 94
If I had the space I wouldn't be moving this along, but I don't so I am.
The bad:
You can see the insert edges in the middle of the playfield, it's actually not bad for a W?D, see photo.
Translite has a scratch, see photo.
Power board is not in good shape, it's all working at the moment but a previous owner had the repair skills of a chimp.
Left flipper plate screw holes had to be repaired with glued cocktail stick inserts due to above chimp stripping them, perfectly secure now.
2 small touched up spots near the left flipper where someone used a screw too long underneath.
Mylar spot covering the roulette lane entrance - looked like a wood imperfection, the paint is all there though.
Ramp has damaged the playfield where it drops, pretty common.
Couple of touch ups here and there.
The good:
Aside from mentioned above the playfield is in very nice shape as you can see from the photos.
Just been completely stripped down to the wood and cleaned, all plastic parts polished, all metal parts tumbled or hand polished including the underside troughs, lane guides etc. Playing extremely fast.
New rubbers, new #47 bulbs throughout, all new warm LED bulbs under inserts.
New reel motors.
New switches here and there.
Power connectors replaced on the power board and on the transformer.
Cabinet in nice unfaded condition (there are small touchups here and there), has been drilled for a lockbar.
New balls.
I'd like £1500 for it.
I also made a video tonight, excuse the inserts appearin to be blinding, it's my stream setup / lighting conditions.
https://www.twitch.tv/system11b/v/62833015
Collection from Cambridge, would prefer in person but can work with Martin.
The bad:
You can see the insert edges in the middle of the playfield, it's actually not bad for a W?D, see photo.
Translite has a scratch, see photo.
Power board is not in good shape, it's all working at the moment but a previous owner had the repair skills of a chimp.
Left flipper plate screw holes had to be repaired with glued cocktail stick inserts due to above chimp stripping them, perfectly secure now.
2 small touched up spots near the left flipper where someone used a screw too long underneath.
Mylar spot covering the roulette lane entrance - looked like a wood imperfection, the paint is all there though.
Ramp has damaged the playfield where it drops, pretty common.
Couple of touch ups here and there.
The good:
Aside from mentioned above the playfield is in very nice shape as you can see from the photos.
Just been completely stripped down to the wood and cleaned, all plastic parts polished, all metal parts tumbled or hand polished including the underside troughs, lane guides etc. Playing extremely fast.
New rubbers, new #47 bulbs throughout, all new warm LED bulbs under inserts.
New reel motors.
New switches here and there.
Power connectors replaced on the power board and on the transformer.
Cabinet in nice unfaded condition (there are small touchups here and there), has been drilled for a lockbar.
New balls.
I'd like £1500 for it.
I also made a video tonight, excuse the inserts appearin to be blinding, it's my stream setup / lighting conditions.
https://www.twitch.tv/system11b/v/62833015
Collection from Cambridge, would prefer in person but can work with Martin.
Last edited:
Seriously though buy with confidence from James, his "the bad" will be things you will never notice, he is picky, I have had several games from him.
I just don't want a situation where someone drives here for 2 hours and doesn't see what they expected.
