What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Where Can I Buy These Connectors?

Steve

Steve

Registered
10 Years
Joined
Jul 21, 2011
Messages
774
Location
Maldon,Essex
I'm looking to replace 3 connectors but can't seem to find them on any parts website?

One is the connector that goes on the left flipper opto board which is missing completely and has been replaced by a leaf switch. I have bought a replacement board and plastic actuator but can't even find the part number for the connector.

The other 2 connectors are the ones that go to the ball trough opto boards. The small one is missing and the wires are soldered directly to the board, the larger one is there but looks damaged?

IMG_2489.jpg IMG_2493.jpg IMG_2494.jpg
 
I don't think that red one is the original either they are normally white think its just a standard molex connector. Or is it 2 rows? I can't see in the pic?
 
This is the connector you need not sure what type they are but here is a picture of one
 

Attachments

  • image.jpg
    image.jpg
    115.8 KB · Views: 9
Yeah a standard connector replace it with a crimped molex andy sells these. Ask him for a 11 way 0.156" molex and trifuron crimps
 
octamus said:
This is the connector that's on my machine
Connector - IDC green 11 mt/thru 22/156 - 5792-10847-11 - Marco Pinball Parts
Click to expand...

It's not this one. I need a 12 position connector and it's really small (30mm) compared to the one above.

replicas said:
I have loads of connectors I can send you, but have you got the setting tool ?
Click to expand...

Thanks for the offer, but I don't think I have the setting tool for this size pin as it's tiny? Plus the picture Octamus has posted shows the wires looped and laid across the connector. Mine have been cut so I'm not sure of the best way to actually do it. Wiring/soldering is definitely not my strong point, I may call on Andy and see if he has them first.
 
Nice one Rudy! They have a ton stuff, I might buy one of the variety packs for stock.
 
You must log in or register to reply here.
Back
Top Bottom