What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What’s a fair price for this lot. EPROM burner/eraser and 38 EPROMs.

Colywobbles

Site Supporter
Joined
Nov 9, 2016
Messages
3,630
Location
Sunderland
Alias
Billy Big B*llocks
Found this while raking through me spares.
ive has it years and can’t even remember what it cost when I bought S.H. but I did use it in its simple copy mode which is plug game eprom one side blank the other and burn.
I did a few TZ home roms way back when and that TZ master was still sitting in there.
I’ve plugged in switched everything on and it all seems like it’s working as it was the day I stored it.

so is it still worth anything?
I know there’s 38 EPROMs with the setup so they must be at least 10p each:rofl:

col

7B1E9E07-E5F2-411F-8A98-1C9C3DBCC66B.jpeg

75A82756-D875-4155-A767-067110FAC762.jpeg

119C2945-4FF2-4ED2-903A-07BF6E24E212.jpeg7B1E9E07-E5F2-411F-8A98-1C9C3DBCC66B.jpeg75A82756-D875-4155-A767-067110FAC762.jpeg
 
what's the size of the eproms?
About 2in x 1/2 in :rofl:

no idea I just plugged master one side slave the other and they just worked.
I can do a hell of lot with pinballs but leave the techie side to the experts in this field which for me is usually P.H.

this may help

680A7D0B-4EAA-4759-B408-88A58503D39E.jpeg
 
I’ve got the same programmer, not used it for a while either, in fact since Windows 10 as the driver wasn’t compatible. But since found out that you can run a compatibility mode on Win10 to run older programmes? I’ve yet to try it though.
 
Back
Top Bottom