Hi,
Does anyone have one of these I can buy ?
Many Thanks
Does anyone have one of these I can buy ?
Many Thanks
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Found it! Wanted - Gottlieb Knocker Bracket ?
- Thread starter Adam Lee
- Start date
-
- Tags
- parts wanted
I have one I’ll dig it out tomorrow afternoon and send you a photo
OP
OP
Many thanks ,I have one I’ll dig it out tomorrow afternoon and send you a photo
Do you need the whole assembly including coil, or just the bracket?
OP
OP
Hi, I do have a new coil , I could do with the plunger bit as I don’t think I can remove it from the burnt out coil
OP
OP
Can you measure the length of the plunger and the sleeve to see if I have compatible ones
Hi BrianCan you measure the length of the plunger and the sleeve to see if I have compatible ones
Hunted high and low, I thought I had a spare coil but seems not
That looks like the right bracket
I think I can buy a coil and sleeve to suit somewhere ?
I should have a coil, I need the length of the knocker plunger to make sure I have the correct length. It’s definitely the correct bracket
OP
OP
Hi Brian , I have found the new coil and sleeve , phew, extracted what’s left of the plunger from the burnt out coil and melted sleeve , it looks to be 3” or 75mm , the hard plastic end has melted a bit so approx
Posted
OP
OP
Thank you so much, appreciated, the last part I needed, will fire up the Joker Poker first time in 10+ years !
