Wafer connectors for Rectifier Board

OptoMystic

Registered
Mar 23, 2016
16
13
3
Petersfield
Hi guys,
Can anyone suggest where I can get the J1, J2 and J3 Wafer Connectors for a Bally AS-2518-18 Rectifier board. Someone has soldered the wires direct to the board and I want to redo the connectors but ideally get the connectors quickly rather than order from the US. I see Marco do a rebuild kit but they takes ages to deliver. They are 8, 10 and 20 pin connectors.
Any suggestions please.
Thanks.
 

astyy

Play Flipper Games for Fun and Recreation
Jan 19, 2015
2,612
1,720
113
Basingstoke
Alias
Dont be nosey :-)
I don't own an early Bally with one of those boards but I think it's the 0.156" pitch connector (measure to check apprx 7 pins/inch) then everything here as Ian says;

Select the headers then you have a choice of connectors either IDC (more original) or preferably Molex/Crimp style (and per the Marco kit use the Trifurcon style crimp). The necessary IDC insertion or Crimping tool are on that page too.