Video Game table needing help!

[Rensenbrink]

Hi all. It's late but happy new year to you all anyway.

I have a video game table, the one with 60 games on, but the screen has just conked out. Anyone know someone who can repair, as cheap as possible (I'm tight AND skint, no point denying it).

I've also been looking to get the joysticks replaced by new, better ones, the joysticks on this have the metal shaft which makes them less 'fluid' and certain games are unplayable now. Any advice on this would be most welcome but the first problem's the most important one obviously

 

[Pin Muncher]

If its a crt you can de case a tv with rgb input and make a cable easy enought to do assuming its jamma wired

 

[Pin Muncher]

Also sticks on your table might be 8 way and some of the old games are played using 4 way sticks meaning you get stuck in corners or cand get off ladders etc

 

[Rensenbrink]

Thanks Pin Muncher, the trouble is I'm completely inadequate with the technical stuff. This is a very similar version of what I have - http://www.ebay.co.uk/itm/Classy-Bl...id=100005&rk=2&rkt=6&mehot=pp&sd=262639335892

 

[Pin Muncher]

Give me a quick call mate

07989479439

 

[Pin Muncher]

Here is a link to an adapter you can get if your Monitor is knackered and you dont want to make up a cable you can just plug this between your 60 in 1 PCB and harness then connect a scart up to Your de cased TV

http://www.smallcab.net/jamma-scart-p-756.html?language=en

 

[Rensenbrink]

Thanks again, PM, and I've joined that games forum too now. Proper gent