Using 2732 eproms on a bally squawlk and talk board rather than 2532

[stevebm1]

Hi,I know I have to alter board jumpers to use 2732’s in place of 2532,but does anyone know if I need to double the image before burning as well?

 

[LyonPinball.co.uk]

Hello, no, 2532 and 2732 have the same size, just pins change, so the image is the same.

 

[stevebm1]

Thanks for the reply

 

[Fantazia2]

.

 

[LyonPinball.co.uk]

.

Correct, they are not direct swap, but in the bally squalk you can use it by changing the jumpers.
2732s are also cheaper.

 

[Nevin]

The jumpers are for changing between 2716 and 2532s. 2732s are not even mentioned.

 

[Fantazia2]

This sites suggest it's possible.

Action Pinball - Bally Squawk & Talk Sound/Speech Board ROM Chip Jumper Settings

www.actionpinball.com

 

[LyonPinball.co.uk]

2732 EPROMs: Jumpers C,E,F,P,R,T,V,X,Y,BB