tz cabinet

[glyn davies]

hi
my tz cab has been wet at some point in its life on the bottom at the front where the coin box whould be and this has swelled up

my question is can the bottom of these cabinets be changed with a new pieace of wood or is it a big job to do

 

[replicas]

hi
my tz cab has been wet at some point in its life on the bottom at the front where the coin box would be and this has swelled up

my question is can the bottom of these cabinets be changed with a new piece of wood or is it a big job to do

Its a big job, as the cabinet has to be taken apart new pieces made and all put back together.
It can be done, but new artwork would probably be needed if the front panel was replaced as well as any damaged caused in taking the thing apart in the first place. Thus you might need to fully re-decal the complete cabinet.
Option 2 is to put a shout out for a wide body cab in good order clean it up and re decal it with TZ decals. Should work out a bit cheaper.
Option 3, take out a mortgage and buy yourself a Woodtech cabinet that is supposed to be better than new. Cough cough. excuse me,
The choice is yours. Good luck in your decision and please let us know which route you take.
D.

 

[cooldan]

Option 4 do what I did when I got R&B with a missing back piece - buy an off cut piece from B&Q and nail it on and spray paint it. Does the job so long as corner pieces can still safely take the weight and transfer it to the legs. Mine is a bodge but I'm sure it's not that hard to do what I did but better.

Call me Manny2

 

[Fintan Stack]

Call me Manny2

:thumb: