paulie888
Registered
Maybe there will be someone out there who can help? I have had the TZ machine for 2 years and it has a very infuriating problem with the bridge diverter. The previous owner had pinned back the mechanical part of the diverter so that the ball always went through to battle the power. Now the diverter has been unpinned, the solenoid only flips 25% of the time and the game fails. I can hear it trying to flip - a sort of buzzing sound.
I have read all the tips to solve the problem; I have changed the solenoid, checked the pin on the shaft. re-aligned the activator perfectly through the playfield, put a washer on the shaft to move the finish position of the shaft, checked and cleaned all the appropriate pins on the power board and I'm just about to get a big hammer from the garage.
Before I do that, has anyone got any other fixes that I have missed along the way. The machine in general is in very good, un-messed with condition.
Many thanks.
I have read all the tips to solve the problem; I have changed the solenoid, checked the pin on the shaft. re-aligned the activator perfectly through the playfield, put a washer on the shaft to move the finish position of the shaft, checked and cleaned all the appropriate pins on the power board and I'm just about to get a big hammer from the garage.
Before I do that, has anyone got any other fixes that I have missed along the way. The machine in general is in very good, un-messed with condition.
Many thanks.