Twilight Zone vertical DMD lines fault

[Glenn]

Hi,

Does anybody know what this issue could be please, I have checked connectors, DMD ribon, earths and batteries?

It starts up fine then after a random time between 10 second and 2 minutes it seems to reset or more often stops playing and shows broken sibgle horizontal line that scrolls down. If powered off and back on staright away it goes staright into the fault but if left a few minutes start up properly but awalys fails again.

Thanks,

Glenn

 

[VeeMonroe]

I was going to recommend disconnecting and reseating all the ribbon cable connectors in the backbox. That worked when we had a similar fault (on a Fish Tales).

However, it sounds like you've already tried that...

 

[Glenn]

I was going to recommend disconnecting and reseating all the ribbon cable connectors in the backbox. That worked when we had a similar fault (on a Fish Tales).

However, it sounds like you've already tried that...

 

[Glenn]

Hi VeeMonroe,

Thanks for that, I have not tried them all so will give that a try.

Thanks,

 

[SpiderPin]

Yeah for vertical lines if reseating ALL connection points on the ribbon doesn't work you may have to replace the cable itself.

 

[Glenn]

Thanks