What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Twilight zone through ball power ball

G

glyn davies

Registered
10 Years
Joined
Jun 23, 2012
Messages
150
Having a issue with the proxy sswitch not picking power ball up i have moved the sensor very slighty it no picks up the power ball the problem being is now i get random balls getting pushed into the shooter lane ive tryed readjusting the sensor but its eiether doesnt pick up power ball or i get these throw outs any thoughts on what i could do
 
You don't need a pic it's easy! U have a lil board with a cable with a white connector attached that is then connected to the sensor. Get a red and a black cable. The pin the red wire goes to solder a wire on the reverse side of the board in the same place do that for the other cable to then do the same on the other board ur basically replacing the connector by using a wire direct. Takes about 5 mins would take me longer to take it apart and take pics
 
Right cool ill try that the little board still has the molex connector and on the big board they are soldered direct to the board so ill resolder the small board tomorrow
 
That's generally the issue. Sorry for being abit short I lost my stepmum yesterday. If u still have trouble give me a shout and I'll do some pics
 
JT. said:
Sorry to hear that Rudi, loosing family is crap.
Click to expand...

She's been terminal with inoperable brain tumour and lung cancer for around 8 months. The last couple weeks shed just been sleeping and saying she wanted it to be over bless her. I'm glad she got to say bye when my son was over end of last year b4 he went back to oz
 
  • Like
Reactions: JT.
You must log in or register to reply here.
Back
Top Bottom