twilight zone problem

[vr46]

hi all, my flippers stopped working and a few seconds later machine went off completely and will not turn on now,just a little flash on a couple of bulbs and a little buzz for a split second ,can the flipper board be the problem, i see pinball heaven do fliptronic flipper board repairs on phils site, thanks,

 

[russdx1]

Sounds like one or 2 fuses have blown. So should be easy fix to get it to boot again. But little bit more difficult to find what caused them to blow in first place. But depending on the fuse that blew helps narrow down the issue.

 

[vr46]

Sounds like one or 2 fuses have blown. So should be easy fix to get it to boot again. But little bit more difficult to find what caused them to blow in first place. But depending on the fuse that blew helps narrow down the issue.

fuses look fine but there is a buzz on one of the boards,not sure which one plus i am terrified of electric so dont want to touch to feel vibration ,

 

[vr46]

fuses look fine but there is a buzz on one of the boards,not sure which one plus i am terrified of electric so dont want to touch to feel vibration ,

just wiggled all the fuses and now is all fine,thanks for your help,