What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Expired Twilight Zone £5000 or part/ex

Expired Due to no activity

Fosgrove

Registered
Joined
Apr 13, 2020
Messages
10
Location
Taunton
Just like buses, three TZ come along in the same week....
I bought this at the start of lockdown from Colin of PinballUK , who had made it good as new - stripped and rebuilt the playfield, tumble polished the metal work, spray painted the metal work inside the back cabinet, put new decals on the cabinet and new rubbers. I bought it on its reputation as the No. 1 pinball on IPDB but try as I might, I really cant get into it, probably because I'm not a good enough player.
The lock shot was very difficult when I got it - the ball would bounce out and so I have applied some magnetic tape as suggested on pinside which has fixed it.
There is a mix of incandescent and LEDs in playfield and backbox, and I have bought light mods for gumball machine and shooter lane and new clock decal, but not yet fitted. One niggle - there is a slight wobble to the lockbar although this is easily sorted by wedging something between the bar and the cabinet. Otherwise all in good order.
Am looking for 5k which is what it cost me, though would consider part ex for eg AC/DC, Family Guy, Simpsons, Scared Stiff.
IMG_0569.JPG
IMG_5300.jpg
IMG_0569.jpg
IMG_1327.jpg
IMG_4846.jpg
IMG_4899.jpg
IMG_8310.jpg
IMG_8400.jpg
IMG_9891.jpg
IMG_6755.jpg
IMG_1075.jpg
 
Last edited:
That wobbly lock bar can be corrected by adjusting the two screws that are visible when lock bar is removed, sounds like it’s just a bit loose, really simple adjustment.


Sent from my iPhone using Tapatalk
 
I apologise that some of the photos are duplicated - I cant seem to be able to remove them. The edit function seems to allow only the change of title. If anyone can advise........
 
Back
Top Bottom