TSPP help

[Steve Waterton]

Hi all, loving my new table but have a few noob problems....

I can't seem to be able to reset the scores, I have gone through the software and selected to reset but they don't seem to be reset?

Also, I want to do a diagnostic to identify any lamps that are out but again am having issues understanding the menu and what the display is actually showing me. My old Dredd was super easy, I am probably being a bit thick.

Is there a TSPP expert out there that may be able to help at all?

Merry Crimble all and thanks.

Steve

 

[Andypuk]

Reset the scores.....do it the easy way and remove the batteries out of the backbox and then put them back in

 

[Steve Waterton]

Reset the scores.....do it the easy way and remove the batteries out of the backbox and then put them back in

Ill check the manual how to do this, am guessing it's in there....

 

[windoesnot]

If you can take batteries out of a TV remote then you can take them out of a pinball machine

 

[Andypuk]

Ill check the manual how to do this, am guessing it's in there....

You'll see the batteries in the backbox - just make sure the machine is OFF....then take the batteries out, and replace.

 

[kevlar]

Re your 2nd question, is it the insert lamps you want to test? If so go I to the menu/diag/lamp and then you can select individual lamps, a whole row or column ( they are connected in a matrix just like the playfield switches ) or just select " all " to light them all.

 

[Steve Waterton]

You'll see the batteries in the backbox - just make sure the machine is OFF....then take the batteries out, and replace.

Lovely cheers!

Any suggestions on making sense of the damn diagnostics for the bulbs?

 

[Steve Waterton]

Re your 2nd question, is it the insert lamps you want to test? If so go I to the menu/diag/lamp and then you can select individual lamps, a whole row or column ( they are connected in a matrix just like the playfield switches ) or just select " all " to light them all.

I want to know which are out and which aren't lit due to not activating a specific game on the table....for example the headlight on the car haven't lit up or the bulbs on the top of the cooling towers. Again Dredd had an easy screen that activated banks of lights and made them flash......

 

[kevlar]

Just select " all " as listed above. Or step through them one at a time. Am I missunderstanding your question?

 

[Steve Waterton]

You'll see the batteries in the backbox - just make sure the machine is OFF....then take the batteries out, and replace.

Merry Crimble all!!

OK so finally get round to having a play and I cant get in the backbox to remove the battery. Am I right in thinking I need to unlock the lock on the underside of the top of the back box to get into it?

If so my key for the coin mech doesn't fit this lock....any suggestions anyone?

Thx

Steve

 

[Steve Waterton]

AhHA FOUND THE keys in the coin mech for the backbox...panic over

 

[kevlar]

Backbox key is " usually " found hanging on the back of the coin door.