The ever revolving door continues to spin and this very fun game is now on the chopping block. This machine has been cared for by a number of well-respected members of this community including @David_Vi , @Dave Playman , @jonathan , @JustLikeMe , @Jason Catrine and myself. Nonetheless it's only clocked in around 2.6k plays.
Over the Christmas holidays I did a full topside strip and clean, taking all three ramps off and giving the PF a good clean and wax. All the rubbers were changed to Titans. Also cleaned the trough which as usual was the grottiest part!
I've added the halo precision metal flippers which makes the left ramp backhandable, a nice gameplay change. Original bats and bushings are included in the coin box.
I've also upgraded the speakers (LE 5.25" sound package) with speaker lights which you can control from your phone (don't even need an app!), it runs WLED.
Finally I put some invisiglass (low reflective) on it, and changed the horrid noisy PSU fan to a quiet one.
The cab is not perfect: there are two small dents near the right flipper button, and the rear is scratched. See pics of both.
In summary, the game plays great, everything works, it's in very clean condition and has the following mods:
This is how far it I stripped it for the xmas clean.
This is what the speaker light configuration UI looks like (you just connect your phone to the "WLED-AP" network and it pops up).
Any questions, comments, requests for more pics, etc. just post in the thread or send me a PM
Over the Christmas holidays I did a full topside strip and clean, taking all three ramps off and giving the PF a good clean and wax. All the rubbers were changed to Titans. Also cleaned the trough which as usual was the grottiest part!
I've added the halo precision metal flippers which makes the left ramp backhandable, a nice gameplay change. Original bats and bushings are included in the coin box.
I've also upgraded the speakers (LE 5.25" sound package) with speaker lights which you can control from your phone (don't even need an app!), it runs WLED.
Finally I put some invisiglass (low reflective) on it, and changed the horrid noisy PSU fan to a quiet one.
The cab is not perfect: there are two small dents near the right flipper button, and the rear is scratched. See pics of both.
In summary, the game plays great, everything works, it's in very clean condition and has the following mods:
- Invisiglass (from Neil's previous batch)
- 1987 cartoon code (better LCD animations)
- Mirror blades
- Glider mod
- Halographic precision flipper bats & bushings (lower flippers)
- Insider Connected QR code reader
- Upgraded speakers
- WiFi programmable speaker lights
- Full colour-matched Titan rubbers
- Slings & guides plastic protectors from Colywobbles
- Quiet PSU fan (can't believe this isn't standard!)
This is how far it I stripped it for the xmas clean.
This is what the speaker light configuration UI looks like (you just connect your phone to the "WLED-AP" network and it pops up).
Any questions, comments, requests for more pics, etc. just post in the thread or send me a PM
Last edited:
️
could you imagine the reasoning to the better half
